Split Pressurized Solar Water Heater

Volume: 100,150, 200, 250, 300 and 500L Tank material: SUS304-2B, porcelain enamel or crystalline coating inner Operating temperature of solar collector: -40 to 200°C Automatic temperature of electrical heater operating pressure: 6bar (0.6MPa) Advantages: Double coil system can combine with original water heater perfectly Split pressurized system is special designed for cold area, it is more effective than other type solar water heater if in cold winter Double coil system can used for heating room Solar collector can be placed on flat roof or sloping roof or fixed on balcony, generous and nobler Tank can be put in house that can reduce the resistance of roof Whole system can be used for swimming pool heating system Working principle: Solar collector can connect to pressured water tank and it can be installed on flat with stand or mounting on sloping roof without supporting stand Heat pipe vacuum tube absorbs heat energy from sunlight, because there is closed-loop between water tank and solar collector, so heat can transfer to water tank from solar collector Conduct medium is Glycol and water mixture, can endure very low temperature and anti-freeze, meanwhile it can exchange heat energy with cold water in water tank With help of controller system, it can balance temperature of water tank and solar collector When temperature difference is higher than preset value, controller system will start circulation pump and heat energy can be transferred between water tank and solar collector