Split pressure solar water heater

solar water heater: Features: 1) The pipeline is made of red copper and conducted by heat transfer medium liquid; water can't flow in the vacuum tubes and is operated when confined; the crust uses aluminum alloy mould material of high strength with airflow design 2) Temperature preservation is equipped with standard electric water heater setting, automatic temperature control exchanger, and increased anode magnesium bars sticking to prevent furring 3) The insulating layer uses polyurethane bulk bubble and has a good effect of temperature preservation 4) The product successfully carries out the installation of separation according to fabricating yard and is harmoniously blended with architecture 5) The equipments of separated solar water heater is composed by heat collector, storage tank, electric control device, hot water mix unit and fittings for circulation and installation. working principle:1. when the doscrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically, 2.the circulation pump makes heat-conducting liquid circulate automatically, 3.the heat-conducting liquid tranfers heat to water by heater exchanger in the water tank. 4. in case the temperature of the water tank does not reach T max, it will start the auxiliary heating device, 5.if discrepant temperature of the collector and the water tank does not reach the set value,the circulation pump shall be shut down automatically. Modelssolar collectorAbsorber Area TankCapacityLoading Capacity20’GP40’GP40’HQJNCY-150L-15JNSC-15-58/1800 (1 pcs)1.95m2150L336780JNCY-200L-20JNSC-20-58/1800(1 pcs)2.60m2200L285868JNCY-250L-25JNSC-25-58/1800 (1 pcs)3.10m2250L265362JNCY-300L-30JNSC-15-58/1800 (2 pcs)3.90m2300L204048JNCY-500L-60JNSC-15-58/1800 (4 pcs)7.80m2500L132632