标准或Nonstandard |
标准 |
结构 |
控制 |
压力 |
中压力 |
权力 |
手册 |
材料 |
Brass |
温度的媒体 |
中温度 |
媒体 |
水 |
港口的规模 |
3/4'' |
出生地 |
Tianjin China (Mainland) |
模式的数量 |
xshda20 |
牌子的名字 |
no |
solar energy water heater thermosratic mixing valve, thermostatic mixing valve, tempering valves for water heater 1.keep temperature constant 2.prevent scald 4solve the problem of the unstable water temperature. 5.spool is the best made. 1.1, the main technical parameters Pressure: 0.03-1MPa Ideal pressure: 0.1-0 .5 Mpa The temperature of cold water: 5-29 º C The temperature of hot water: 50-80 º C The temperature of maximum water: <95 º C Temperature range: 35-45 º C Temperature accuracy: ±1 º C Maximum pressure of the cold and hot water: 8:1 1.2, the features: Thermostatic mixing valve can adjust the ratio of hot water and cold water to ensure that the water maintain a constanttemperature. With its easy installation,it is responsive, and there is need of power supply. 1.3, the installation 1.3.1. The valve with a red mark end is connected with hot water pipe, and the blue mark end is connected with cold water. 1.3.2. If the cold water pressure is different with the hot one, you should install a one-way valve at the end of smaller pressure or install two one-way valves at the both side to prevent the water channeling each other when not in use. 1.3.3. It’s better to make the pressure of the each side at the same line when it ’s installed. If the pressure is different , you should add a pressure relief valve at the side with more pressure to ensure that the valve can be mixed with the normal adjustment.