Solar Energy Heater,Solar Water Heater,Solar Syste

Working principle of Solar Energy Heater/split pressurized solar heater: when the diffeference of collector temperature and tank temperature gets to the set value, the circulation system will start work. It will transmit the solar energy from solar collector to the tank. Split pressurizedsolar energyheater features: a. Module design, arbitrary combination, harmonize with the building perfectly b. Intelligent control and automatic operation c. Anti-freeze: Using the anti-freezing liquid as the medium and the controller has the anti-freezing function d. Multifunction: bathing, washing, domestic heating etc. e. Work at anytime and enjoyable. Material of Split pressurized solar energyheater: 1) The pipeline is made of red copper and conducted by heat transfer medium liquid 2) Temperature preservation is equipped with standard electric water heater setting, automatic temperature control exchanger, and increased anode magnesium bars sticking to prevent furring 3) The insulating layer uses polyurethane bulk bubble and has a good effect of temperature preservation 4) Water tank (interior):Stainless steelinner tank 5) Manifold of solar collector: aluminum alloy outcasing& red copper flow passage 6) Glass tube: new trivalent element heat tube, borrosilicate glass 3.3 7) Solar working station 8) With heat pipe: anti-freezing > -35 degrees centigrade 9) Water capacity: 150L, 200L, 250L, 300L, 500L 10) Pressure of split pressurized solar water heater: 6 Bars 11) Daily efficiency: >= 55%(>=42% in winter) 12) Heat preservation: 72h to 80h 13) Electric heater: 1.5Kw to 3Kw