Single-phase Electronic Energy Meter (Infrared /RS

1. Summary DDS3699 series single-phase electronic energy meter is a new generation energy measuring device which designed and developed through our many years’ experience in energy meter industry and spot operation. It adopts modern microelectronics, computer technology, electronic measuring technology, data communications technology and advance SMT technology.The meter technical features fully comply with GB/T17215.321-2008, JJG596-1999, DL/T830-2002 and DL/T645-1997 etc. national standards and industry standards and has high accuracy, good stability, strong overload capacity etc. advantages.2. Technical SpecificationsRated Voltage: 110V; 220V; 230V; 240VNormal Working Voltage Range: 0.7Un 1.3Un Rated Frequency: 50Hz or 60HzRated Current: 5(30)A; 10(60)A; 20(80)A or as requestConstant: 1600imp/kWh, 3200imp/kWhAccuracy Class: Class1, Class2Display: LCDpower consumption: 1.0W, 8VA(voltage circuit) 1VA(current circuit) Ib Working Temperature: -25°C 60°C Extreme Temperature: -40°C 70°C Humidity Range:75% on average 3. Functions and features 1) Measurement Function can measure the positive and negative active energy (reverse power is accumulated as positive energy). The phase and neutral line take samples respectively and are able to measure energy with larger current, so as to prevent short circuit stealing. 2) Meter TestingThe meter has optical-electronic pulse output interface, which used for meter test. 3) Display Function A. Information use LCD display. B. LED Indicator: Pulse signal light is red color. If there is no pulse, light is not on; if there is electric power, then the light flash. C. Power failure display function after disconnecting the external power supply, the environment-friendly pillar Lithium battery support LCD display the current power outage wake. 4) Communication A. Infrared communication interface: communication distance 5m, communication angle ± 15 °; B. RS485 Communication Interface: RS485 communication interface and the electric meter inner circuit achieve electrical isolation and effectively protect circuit. Communication speed can be set, standard rate is 1200bps, 2400bps, 4800bps, 9600bps; the default rate is 2400bps 5) Clock and time correction function Adopts built-in hardware clock circuit with temperature compensation with calendar, timing and leap year automatically switch function. within the temperature range of -25°C 60°C, the clock error ±1s/d 4. Installation Wiring Meter is usually vertical installation, the installation wiring diagram refer to the meter end cover. 5. Transportation and Storage Meter must be in original packaging for transport and storage conditions. Fort storage environment, there should be no corrosive gas; storage height shall not exceed five layers