silane A-2120

SilaneSi-602(A-2120) Introduction Chemical Name : N-(beta-aminoethyl)-gamma-aminopropylmethyl- dimethoxysilane CAS NO. : 3069-29-2 Molecular Formula:NH2(CH2)2 NH(CH2)3Si CH3(OCH3)2 Foreign Company's Trademark: A-2120(America Union Carbon) Z-6023(Dowcorning) KBM-602(ShinEtsu) GF95(Wacker) Structural formula: silane Si-602finds use as an: · Adhesion promoter in polysulfide, polyvinyl chloride plastisol, silicone, one- and two-part urethanes, and epoxy adhesives and sealants · Additive in phenolic and epoxy molding compounds · Additive to latex coatings, adhesives and sealants Features and Benefits Feature Benefit Polyamino functionally ·Reactive group for coupling with a variety of resins. ·Good wetting of substrates. Difunctional silane ·Good stability in waterborne systems. ·Improves adhesion while maintaining elongation of elastomeric systems. ·Improved shelf-life of formulated products. Typical Physical Properties Physical Form Colorless, clear liquid Specific Gravity at 20oC, g/cm3 0.965 0.975 Purity, % 97.0 min Refractive Index at 20oC 1.4440 1.4490 Colour, Pt-Co Max 25 Applications silane Si-602 may be used as an additive, thereby eliminating the need for special primers in numerous bonding applications. Specific systems that demonstrate improved adhesion when silane Si-602 is used are: RTV Silicones and Hybrid Silane-Crosslinked Sealants silane Si-602 addition to one- and two-part silicone-crosslinked sealants improves adhesion to a variety of substrates, including glass, aluminum and concrete. Silane Si-602 provides enhanced adhesion performance without negatively impacting elongation. It is added at a loading of 0.5 to 1.0 percent by weight. Polysulfide Sealants When added to one- and two-part polysulfide sealants, silane Si-602provides better adhesion to a variety of substrates, including glass, aluminum and steel. Silane Si-602 is typically used at a loading of 0.5 to 1.0 percent by weight of the sealant. It disperses well into the sealant and produces cohesive failure in the sealant rather than adhesive failure of the bond between the sealant and the substrate. Furthermore, the use of silane Si-602 eliminates the need for primers normally required to achieve adhesion to surfaces. Plastisol Sealants Adding silane Si-602 as a replacement for polyaminoamide adhesion promoters in plastisol sealants improves bonding to metal substrates. In addition to increased strength, the silane-modified plastisol sealant has better overall appearance than a system that uses polyaminoamide adhesion promoters. silane Si-602modified systems have a very light color, and the cured compound is bubble-free. Additive in Phenolic and Epoxy Molding Compounds Silane Si-602, as an additive in phenolic and epoxy molding compounds, reduces the water absorption of molded composites. This, in turn, leads to improved wet electrical properties, particularly at low frequencies. Product Safety When considering the use of any Nanjing LIPAI products in a particular application, you should review our latest Material Safety Data Sheet and ensure that the use you intend can be accomplished safely. For Material Safety Data Sheets and other product safety information, contact the Nanjing LIPAI . Before handling any other products mentioned in the text, you should obtain available product safety information and take necessary steps to ensure safety of use.