双管热交换器

Double Tube Heat Exchanger TXH Tubular heat exchanger can be used in heating or cooling application,It is a good selection in all sanitary industry,such as dairy,brewery,beverages process.TXH Tubular heat exchanger also can be used to process the high viscosity product,and the product containing juice fibres,particles or pulps.Normally, it can be used as heat exchanger in UHT,HTST,CIP,etc. And it is an alternative for Plate heat exchanger.The capacityHeating or cooling flowrate 500-50000 Litres per Hour.Type/ModelCapacitySteam ConsumptionUXH-T30001000-3000L/Hour150kg/hUXH-T50003000-5000L/Hour270kg/hUXH-T80005000-8000L/Hour435kg/hUXH-T100008000-10000L/Hour550kg/hUXH-T1500010000-15000L/Hour830kg/hUXH-T2000015000-20000L/Hour1115kg/hUXH-T2500020000-25000L/Hour1400kg/hStructureTXH tubular heat exchanger was consist of an external stainless steel shell,AISI304 and a truss of internal stainless steel tubes,AISI316L. The product flows in the inside of the tubes and the cooling/heating medium flows on the outside of the tubes in counterflow with the product.The insert tubes can easily be removed from the outer shell for inspection of the medium side and cleaning the outside of the tubes.In connection of a process pipe system,the insides of tubes are a closed container,It can stand a high pressure.TXH tubular heat exchanger are in sanitary design .A set of O-ring closed the cooling /heating medium between the shell and the outside of the insert tubes.The material of the outer shell can be alternated with AISI316L under customer’s requestion.Features* The outer shell and the insert tubes was separated design,the insert tubes can be easily removed from outer shell for maintenance. And the separation design can absorb the different retractility. * All the surface of internal are in sanitary design,it is easy for CIP. * It can process all liquid productnot only low viscosity, but also high vicosity ,even the product containing fibres,particlesor pulps . * The baffleplate can enhance the heat exchanger rate,and it can fix the multiple insert tubeswithout any welding point. * It can stand up to 50 bar pressure for the product flow side and medium flow side. * It is saving cost , as it required few maintenance fee. Heat Interchanger area : 0.1 m²—15 m²/ PC Working Temperature: -30°C — 170°C Working Pressure: -3 Bar ­­— 50 Bar