石棉床单

Detected by national authority organization, each technical performance of asbestos sealing products achieves national standard and international level.The products are mainly composed ofasbestos fiber with many kinds of latexes as binder. Asbestos sheet have the good performance of high strength, good compressibility & recovery and torque resistance, wonderful heat resistance and acid/alkali/corrosion resistance. They have good sealing performance in oil, water, gas and etc. medium, effectively prevent the leakage from the interface of tri-directions and avoid the environment pollution.Serial TypeAsbestos Latex SheetAN-C, AG-C, AG-2-CAsbestos Vulcanized SheetAN-L, AG-L, AG-2-L, TDS-LAsbestos Compound SheetWAN-AN, WAN-AN-P, WAG-AG, WAG-AG-P, WAG-AG-2, WAG-AG-2-PPleasesearch the corresponding type description to know more about detailed technical specification of the products.Recommendation List of Asbestos Material Application1. Intend for Cylinder Head Gasket and Exhaust Manifold Gasket of all kinds of internal combustion engines such as gasoline, diesel and etc. enginesMaterial TypeDensity(g/cm3)Tensile Strength(MPa, min.)short duration temp.(C, max.)WAN-AN2 3/400WAN-AN-P2 3/400WAG-AG2 3/400WAG-AG-P2 3/400WAN-AG-22 3/400WAN-AG-2-P2 3/4002. Intend for Sealing Gasket of all kinds of internal combustion engines such as gasoline, diesel and etc. enginesMaterial TypeDensity(g/cm3)Tensile Strength(MPa, min.)short duration temp.(C, max.)AN-L1.2 1.55.0400AG-L1.2 1.55.0400AG-2-L1.2 1.55.0400TDS-L1.25 (min.)7.04003. Intend for pipe & Flange Sealing GasketMaterial TypeDensity(g/cm3)Tensile Strength(MPa, min.)short duration temp.(C, max.)AN-L1.2 1.55.0400AG-L1.2 1.55.0400AG-2-L1.2 1.55.0400TDS-L1.25 (min.)7.04004. Intend for Sealing Gasket of general mechanicalMaterial TypeDensity(g/cm3)Tensile Strength(MPa, min.)short duration temp.(C, max.)AN-L1.2 1.55.0400AG-L1.2 1.55.0400AG-2-L1.2 1.55.0400TDS-L1.25 (min.)7.04005. Intend for making Asbestos Compound Sheet or Gasket, Insulation Material, Cushion and FillerMaterial TypeDensity(g/cm3)Tensile Strength(MPa, min.)short duration temp.(C, max.)AN-C0.9 1.22.5400AG-C0.9 1.22.5400AG-2-C0.9 1.22.5400