摄像机的防盗报警器

OurCamera Independent Anti-theft Alarm is applied in the camera show. You can show your realcamera with the use of our anti-theft alarms. Model: Z52A Dimensions: Total height: 150mm; Sensor Diameter: 70mm; Base diameter: 100mm; Support bar: Oval shape, upper diameter: 27mm; Lower diameter: 34mm. Color: Black Design: Independent bracket Optional: Acoustic-magnetic detacher Functions: Cut off any line of the sensor, controller alarms: When sensor is removed from camera, controller will alarm. Once controller is removed and is within the read range of antenna, controller will alarm and antenna will do as well. Indicating light: When LED green light is on, it works well; when LED red light is on, it alarms. Status test: Acoustic-magnetic detacher can test burglar alarm's status Power lasts a year Parameters: Dormancy current: 1.5uA Standby mode current: 2uA. Vestingwerk current: 2uA Alarm status current: 20mA Alarm volume: 95db Remote distance: 5cm Voltage: DC3V Installation regulations: Installation: Remove 3M glue, and then attach on object. Alarm on: Make acoustic-magnetic detacher straight pointing to controller and send message within 5cm. Press “Unlock”. Indicating light turns green. Alarm is on. Alarm off: When burglar alarm sounds, let detacher point to the controller and send message within 5cm. Press “Lock” and alarm is off. Alarm test: Make acoustic-magnetic detacher straight pointing to controller and send message within 5cm. Press “Unlock”. Indicating light turns green. Alarm is on. And then press “TEST” to test alarm. Press “Lock” can turn off the test.