screen printing ink for silicone products

Product InstructionProduct NameScreen printing ink of bicomponent silicone rubberDescription1,The Screen printing ink has good gloss and excellent adhesion.2,confronts to the standards of SONY-GP and ROHS.ApplicationsApplied to the surface of silicone rubber or the back of conductive adhesive.Instruction for use1,This product is bicomponent, A part is primary agent, B part is catalyst3,dilution ratio: ink / thinner = 1 / (1.2 2). 4,catalyst amount = weight of primary agent × 2%5. According to the above ratio, add the solvent and catalyst, and then mix it to dissolve the ink.6,after adding the catalyst, the ink should be kept in cold storage (below 8 °C). Bringing the ink out from the refrigerator, firstly, make the ink return to Normal temperature, if temperature of ink recovers to normal condition, you can open cans to use it. 7,curing conditions: 180°C × 20 minutes. Remarkswhen not mixing A and B part .the time durability in the conditions of temperature (≤ 30 °C) is 6 months; After mixing A and B components :The time durability is 48 hours in the conditions of temperature (≤ 30 °C).