Scraper Slag-Dredged Machine

Technical Parameters 1.Type:HWG1000IV-5 2.Description:High effective roller slag cooler 3.Power Output:3-5t/h,Max.6t/h 4.Roller Diameter:1000mm 5.Roller Length:4800mm 6.Slag-Input Temp.:<1000C%%D 7.Slag-Output Temp.:<100C%%D 8.Cooling Water Volume:20-25t/h 9.Water-Input Temp.:<30C%%D 10.Water-Output Temp.:<65%%D 11.Driving Power:5.5Kw 12.Equipment Weight:7500Kg Equipment Installation Prompt: 1.Equipment shall be transported as an integral part, lift and put down lightly avoid of damage. 2.Equipment shall be level alignment adjustment when installation to keep overall unit operate upon level condition. 3.Boiler slag-discharging pipe central line shall be consistent with slag cooler slag input pipe central line, keep sufficient expanding space for end of slag- discharging pipe and slag input tube, which shall be connectted with transition bushing. 4.Operate unload equipment and view operation state, eliminate abnormities if found. 5.Fill full with water before equipment operation and keep unblocked for water circuit. 6.Equipment rotate direction is anticlockwise view from slag output side, and equipment rotate direction is clockwise view form slag input side; equipment operation direction shall be kept accordance with direction indicated, it is unpermitted for loading reverse. 7.User shall connect indraft pipe to flue gas pipe as per the manual in order to keep equipment operate under negative pressure and help wind cooling. 8.Please confirm that the motor installation position if apply for the site.