SBS CONTACT ADHESIVE

SBS adhesive 999 Appearance Green clear viscous liquid without mechanical impurity Initial Viscidity 0.72 Mpa Shear strength 1.5 Mpa Viscosity Low (80 100 cps, very easy to use) Density Low(around 0.8kg / L)small amount of product can be spread to large area ( 2kg to spread 18 m2) Solid content 38%-42% Impact to environment Environmental friendly ( benzene<0.1g/kg,Dissociative formaldehyde<0.05g/kg) Open time Around 15 minute-6 hours Application aluminum-plastic board, fire-proof polywood, three-polywood, log, wood,leather, foametc. Direction 1. Clean two parts to be bonded first (clean out the dirt,water or surface thickening & thinning etc.) and stir the adhesive to get better result. 2. Evenly brush or spay the adhesive to the two parts. 3. Let dry (around 15 mins, depending on humidity, temperature in local place). When felt dry by finger, put the two parts together and press for a while to finish the work. 4. The boards can be used only 10 minute after they are adhered.