consists of Product: Poy-Putty is also known as unsaturated polyester putty, is formed with unsaturated polyester resins, pigments and physical pigments, additives and curing agent. product use: It is mainly used to repair flaws such as substrate pits, needle shrinkage, cracks and weld defects before coating top-coat, so that the substrate surface Flat, to meet the top-coating fullness, smoothness and fresh, etc requirements of appearance decorative. Picture of requirements. Suitable for filling the surface of automotive, machine tools and furniture. Main technical indicators: ItemTechnique Indextest methodPutty AppearanceNo feeling of crust and Stir openVasualgel time(Period of application)≥5minGB/T 7193.6 (25°C,2% curing agent)Day time≤2HGB/T 1728 (25°C,2% curing agent)Coating film AppearanceColor uniformity, no obvious coarse-grained and holes, after dry without crackGB/T 1727rubbing propertyEasy starting powder, non-stick sandpaperGB/T 1770Flexibility≤100mmGB/T 1748Impact Strength≥300N.cmGB/T 1732 Usage: 1, get rid of being coated oil stain, rust, old paint and water; 2, mix thoroughly the main ash and firming agent according to 100:2 (weight) and to ensure color consistency, and within 10 minutes finish scraping coated; 3, coat putty blended on the metal surface, if the bubble inflow, must use scraper to strickle thoroughly; 4,see that After hardening thorough, you can wet grind or dry grind. Notes: 1, capped immediately when not in use so as to avoid solvent evaporation metamorphism; 2, incorporating "Thinner" or other foreign objects is strictly prohibited.