RTV silicone adhesive for Sealing and Gluing SGS

1501silicone sealant provides the following product characteristics: Technology Silicone Chemical type Alkoxy silicone Appearance (uncured) Translucent liquid Components One component - requires no mixing Cure Room temperature vulcanizing (RTV) Specific benefit Non-corrosive Applications Sealing and gluing TIPICAL PRODUCT DATATYPICAL UNCURES PROPERTIES Appearance Translucent liquid PH 7.2 Tack-free time(23 C) min 4 TYPICAL CURED PROPERTIES (7DAYS @ 23°C /50% RH) Appearance Elastic rubber Specific gravity 1.01 Hardness Type A 22 Tensile strength MPa 1.36 Breaking elongation % 140 Shear bond strength MPa 0.3 Volatile siloxane Wt % 0.028 Volume resistivity M •m 2*107 Dielectric strength KV/mm 23 Dielectric constant(60Hz) 2.9 Dielectric loss(60Hz) 0.005 GENERAL INSTRUCTIONS AND PRECAUTIONSAvoid getting uncured material in the eyes, take eye protection at all times when working with this product.Extended contact with the skin can cause irritation and should be avoided.Wear protective gloves when working with this product.Maintain good ventilation in the workplace at all times. DIRECTIONS FOR USE For best performance bond surfaces should be clean and free from grease.Full performance properties will develop over 72 hours.Moisture curing begins immediately after the product is exposed to the atmosphere, therefore parts to be assembled should be mated within a few minutes after the product is dispensed.Excess material can be easily wiped away with non-polar solvents STORAGE Store in a dry, cool place away from direct sunlight. Optimal Storage: 8°C to 21°C. Storage below 8 °C or greater than 28 °C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container.Note The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user's responsibility to determine suitability for the user's purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide.