RT Series Rotary Table PU Foaming Line

The RT1100/18 automobile seat cushion foaming line. That is composed of 1 set HPM50/50/20 three-component double-hardness high pressure foaming machine , 1 set diameter 11 meters rotary table foaming line by including installed on the rotary table 6 sets of MP16085 mold carriers as well as 12 sets MP7065 mold carriers, the mold temperature controller and so on. This production line uses the production pattern that the automatic intermittent type or the continuous working, adjustment the rotary table rotational speed by the frequency converter, automatically opening\ closing the mold carrier,automatic identify mold number, by manual control or automatic control mixing-head to pouring, various equipment components have provided the advanced electricity control system, may separable step debugging, when production it is operated on-line. Technical Parameter for RT1100 RotaryTable: 1. Production tact: 15 30sec.; 2.Time of per circle for mold conveying on the line: 4 8min.; 3. Rotary table height: 425mm; 4. Production ways: automatic intermittent type stopped pouring; or the continuous working, manual following pouring; or automatic Robot pouring; 5. Main motor power: 5.5kw; 6. Heating power of the mold temperature controller: 2×15kw; Supply water tank volume: 200L; 7. The compressed air supply required: The pneumatic cylinder: 0.8 Mpa, dry,oil mist; flow capacity:1000NL/min.; The gasbag: 0.45 Mpa, dry, oil-less;flow capacity:1000NL/min.; 8. Power supply required: 3× 380V/50HZ±10% or as customer's local condition; Control voltage: AC110V/DC24V; Total power: 38kw; 9.Floor space: 12500×12500mm. Common the rotary table model and specification, RT700 ,RT900, RT1100;