Ribbon Fiber Protection Sleeve--Single Quartz

Features 1. The outer jacket of the sleeve is made of polyolefin while the inner tube is made of EVA. 2. Consist of cross-linked polyolefin, hot fusion tubing and quartz 3. Keep optical transmission performance of optical fiber 4. Provide safe protection to optical fiber splicing 5. Easily use and avoid any damage to the optical fiber during installation 6. Sealing structure provides good performance to the Splicing in the environment with temperature and humidity. Technical Data Properties Test MethodTypical DataTensile Strength(MPa)ASTM D 267118Ultimate Elongation (%)ASTM D 2671700Density(g/cm2)ISO R1183D0.94Dielectric Strength (KV/mm)IEC 24320Dielectric ConstantIEC 2432.5Longitudinal Change (%)ASTM D 2671+5 Operating Temperature: -45 – 100°C Shrinking Temperature Range :90 - 110 Ordering information Ribbon Fiber Fusion Protection Sleeve Single Quartz Mid-shrink Type ( NEW) Strength Member :Quartz Packing :25pcs/bag such as Part No.Fiber CapacityQuartz Width*heightFusion TubeWidthHeat Shrink TubeLengthDeviceO.D. (after shrink)61401240123.9±0.1*1.9±0.1 mm3.9±0.1*40±1 mm40±1 mm4.8±0.2 mm Note,Other length and sizes are available on request.