Refractory Bricks

Refractory Bricks We can supply most kinds of refractory materials such as refractory bricks(magnesia bricks, magnesia-carbon bricks, MgO-Cr2O3 bricks, magnesia dolomite bricks, high alumina bricks, silicon carbide bricks, etc.), refractory mortar and castable, and most of the refractory products used for ladle, tundish, blast furnace and EAF. Our products range also include stopper rods, ladle shrouds, submerged entry nozzle and tundish nozzle, slide gates andholloware casting sets. For more detailed information please check our products range.Magnesia-Carbon Bricks Horton supply a complete range of MgO-C bricks with the features of high strength, excellent resistance against slag, high refractoriness, and good thermal shock resistance.High Alumina Refractory BricksHigh alumina brick for blast, furnace are used in the part of throat, stack, hearth and its temperayure of refractoriness under load is normally above 1420°C 1550°C that is higher than the clay brick. High alumina brick for blast furnace are of very good ability of anti-acidity, anti-metal fluid corrode and anti-oxidation. Fire Clay Refractory BricksFire clay brick for blast furnace is used in the part of throat, stack, hearth, bottom for a small blast furnace and the stack for a big blast furnace. The main features: High compressive strength in normal temperature, High ability for anti-abrasion during work, Low shrinkage degree under high temperature so as to maintaining an integrity of the furnace lining; Low apparent porosity, and Fe2O3 content to reduce the carbon deposit in the blowhole and avoid the bricks broken in case of expansion; Seldom melting point settings shape. Sialon Bonded SiC bricks and Corundum bricksSialon bonded refractory brick takes advantages of both Sialon and SiC/corundum, i.e. high strength, outstanding resistance to thermal shock, oxidation and alkali. It is becoming an alternative product for latest lining design of blast furnace.Unburned Compounded Slide Plates Horton developed series of fine-quality unfired compounded slide plates.Well Block for NozzleHorton series of well blocks for nozzles are made from high-purity, high-density, high-strength materials and matrix-adjusted system (MAS).Seating Block for Purging Plug Made from high-purity, high-density, high-strength materials and MAS matrix-optimized system, Horton seating blocks are high-tech product developed simultaneously with purging plug.Self-flow CastablesAccording to the solid rheology theory and the actual service condition of refractory, Horton has developed the high-tech self-flow castables (SFC) in China.Castables for LadleBased on low-cement castable and superfine powder technologies, Horton series of castables for ladles to meet the operation conditions of various ladles.Stopper RodsThe Horton series of mono block stoppers include alumina-carbon type and magnesia-carbon type to suit for individual casting conditions.Ladle ShroudThe Horton serial ladle shrouds are ISO-pressed Al2O3-C based products, featuring superior thermal resistance to erosion-corrosion, oxidation and thermal cycling, etc.Submerged Entry Nozzle(SEN)Horton has supplied SENs with fast-changeable system and SENs for thin slab casting for many customers worldwide, demonstrating reliable performance and long service life.Slide Plates for TundishHorton series of slide plates have the features of high strength, high erosion/ corrosion resistance, excellent thermal shock resistance and long life etc.Tundish Upper NozzleThe Horton series of upper nozzles with ZrO2 Insert feature high refractoriness, superior resistance to thermal shock, erosion/corrosion etc.Metering NozzleHorton series of metering nozzles adopt mosaic pattern - the zirconias inner core and alumina sleeve including typical nozzle and fast-changeable nozzle.Skimmer Block, Impact Pad and Well BlockHorton series products feature high fired strength, superior resistance to erosion/corrosion, long service life.Self-flow CastablesSelf-flow castable is characterized by suitable setting time, good flowability, high strength, superior resistance to thermal shock, erosion/corrosion.Tundish Dry Vibration MixesHorton series dry vibration mixes are designed for tundish working lining. The products feature excellent adhesion, easy dry-out etc.Tundish Spray MixesHorton series spray mixes for tundish lining feature easy of coating, long life, high erosion/corrosion resistance, etc.