热心理医生确定管

Heat Shrink Identification TubingModel: HSID DESCRIPTIONS Heat Shrink identification tubing(HSID) are designed to meet the wire and cable marking needs of manufacturers with high performance requirements. Made from permanent, flame retarded, radiation cross-linked heat-shrinkable polyolefin. CHARACTERISTICS -Permanent identification sleeves. -Computer-printable. -Lightweight for aerospace applications. -Choice of Military grade & RoHs Compliant Material or Halogen free Material. -2:1 and 3:1 shrink ratio. -Flame retardant , VW-1. -Temperature rating +135/275°F -Quick recovery of heat sensitive areas. Temperature rating Operating temperature range: 55°C to +125°C 67°F to +257°F Minimum recovery temperature: +85°C/ +185°F Totally shrink temperature: +115°C/+239°F Maximum storage temperature +50°C /+122°F HSID-2X Product Number Expanded As Supplied(mm) Recovered After Heating(mm) Inside Diameter Flat Width Double Wall Thickness Inside Diameter Single Wall Thicknes HSID-2X-1.6 2.00±0.20 3.7±0.3 0.48±0.10 ≤0.79 0.45±0.06 HSID-2X-2.4 2.79±0.20 5.0±0.3 0.48±0.10 ≤1.18 0.49±0.06 HSID-2X-3.2 3.64±0.23 6.3±0.4 0.48±0.10 ≤1.59 0.51±0.06 HSID-2X-4.8 5.26±0.25 8.9±0.4 0.49±0.10 ≤2.36 0.54±0.06 HSID-2X-6.4 6.92±0.28 11.5±0.4 0.50±0.10 ≤3.18 0.56±0.06 HSID-2X-9.5 10.2±0.32 16.7±0.5 0.51±0.11 ≤4.75 0.59±0.06 HSID-2X-12.7 13.5±0.36 21.8±0.6 0.52±0.11 ≤6.35 0.60±0.07 HSID-2X-19.1 20.1±0.40 32.2±0.6 0.53±0.11 ≤9.53 0.62±0.07 HSID-2X-25.4 26.7±0.45 42.5±0.7 0.55±0.12 ≤12.7 0.63±0.07 HSID-2X-38.0 39.8±0.51 63.2±0.8 0.57±0.12 ≤19.1 0.64±0.07 HSID-2X-51.0 53.0±0.56 83.9±0.9 0.58±0.13 ≤25.4 0.64±0.08 HSID-2X-76.0 79.4±0.56 125.3±1.0 0.59±0.13 ≤38.1 0.64±0.09 HSID-3X Product Number Expanded As Supplied(mm) Recovered After Heating(mm) Inside Diameter Flat Width Double Wall Thickness Inside Diameter Single Wall Thicknes HSID-3X-1.6 2.00±0.20 3.7±0.3 0.47±0.10 ≤0.53 0.52±0.06 HSID-3X-2.4 2.79±0.20 5.0±0.3 0.47±0.10 ≤0.79 0.57±0.06 HSID-3X-3.2 3.64±0.23 6.3±0.4 0.48±0.10 ≤1.06 0.61±0.06 HSID-3X-4.8 5.26±0.25 8.9±0.4 0.49±0.10 ≤1.59 0.67±0.06 HSID-3X-6.4 6.92±0.28 11.5±0.4 0.50±0.10 ≤2.36 0.71±0.06 HSID-3X-9.5 10.2±0.32 16.7±0.5 0.52±0.11 ≤3.18 0.77±0.06 HSID-3X-12.7 13.5±0.36 21.8±0.6 0.53±0.11 ≤4.75 0.80±0.07 HSID-3X-19.1 20.1±0.40 32.2±0.6 0.55±0.11 ≤6.35 0.84±0.07 HSID-3X-25.4 26.7±0.45 42.5±0.7 0.56±0.12 ≤8.47 0.86±0.07 HSID-3X-38.0 39.8±0.51 63.2±0.8 0.57±0.12 ≤12.9 0.89±0.07 HSID-3X-51.0 53.0±0.56 83.9±0.9 0.57±0.1 ≤17.2 0.90±0.08 HSID-3X-76.0 79.4±0.56 125.3±1.0 0.57±0.13 ≤25.8 0.92±0.09 Remarks: Two packing ways: 1. Cut in 55mm/ pc, adhibit together in a line and packed in roll (T type) 2. Not cut and packed in roll (R type).