RC-8DS dissolution tester

The dissolutiontesters are used for detecting velocity and extent of pharmaceutical dissolution from tablet, capsule etc in prescriptive menstruum. Applicable standards: National standard(Chinese codex)2005 Corporate standard(Dissolution tester)Q/12XQ0187-2004 Features: 1. Eight vessels and eight poles, four vessels and four poles at back, four vessels and four poles in front. 2. The head part of the tester can be artificially turned over smoothly and flexibly. 3. The basket units and paddle units are made of imported stainless steel(SUS 316L) 4. The magnetism-pumped circular water current can heat the system evenly, and the bath liquidcan achieve an equal temperature. 5. A MPU is used in dissolution tester to automatically control the temperature rotational speed and time, and the parameters can be preset at any time. 6. It can be operated conveniently by keystroke, the measurement result is displayed by LED, thepreset and real date can be displayed alternately in time. 7. Automation: auto-set, auto-diagnose, auto-alarm. 8. It can test by self and alarm automatically, the dissolution parameters of Chinese codex 2005are stored in and can be taken out at any time. 9. Time can be preset at many points, the beeper sounds automatically to any point, and then the tester automatically runs to the next one. Technical data: Speed range : 20-200 r/min Speed accuracy : +/- 2 r/min Temperature range : room temperature to 45 c Temperature accuracy: +/- 0.3 c Preset timing : nine points(1-999)minute Time accuracy : +/- 1% Paddle radial run-out : +/- 0.5 mm Basket radial run-out : +/- 1 mm Power : 220V/50HZ/1200W or 110V/60HZ/1200W Weight : 75 kg Overall size : 680*540*480 mm