去45m索尼公司的CCD摄影机

IR ccd camera Model 828C 828S 828SN 828SNH 828HQ Image Sensor 1/3-inch CMOS CCD 1/4-inch SHARP CCD 1/3-inch SONY CCD 1/3-inch SONY CCD 1/3-inch SONY CCD Effective Pixels PAL:628*582 NTSC:510*492 PAL:500(H)×582(V) NTSC:510(H)×492(V) PAL:752(H)×582(V)NTSC:768(H)×494(V)NTSC: 768(H) X 494 (V)PAL: 752(H) X 582(V) Horizontal resolution 380TV Lines 420TV Lines 480TV Lines 520TV Lines Signal format PAL/NTSCIR Wavelength 850nmIR Distance 45MLens 3.6mm;6mm;8mm;12mm;16mm;25mmMinimum illumination 0.000LUX/F1.2 (LED on)Backlight Compensation AutoElectronic Shutter 1/50(1/60) 1/100,000secWhite Balance AutoS/N Ratio ≥48dBGamma Correction ≥0.15Video output 1.0Vp-p 75ΩSync System InternalOperating Temperature -20°C - +60°C RH95% MaxPower Supply DC12V±10%Brand LM/OEMInstallation Notes: (1) Do not use this product falls on the ground or by strong percussion; (2) unless instructed otherwise, do not dismantle the machine; (3) before use to determine whether the specified power supply voltage; (4) to avoid targeting light (such as sunlight, lighting, etc.), otherwise easily lead to too bright or pull light phenomena (this is not a failure), will also affect the CCD life; (5) Avoid wet conditions, dust, extreme heat, extreme cold, strong electromagnetic radiation and other venues; (6) If abnormal, please unplug the power and with the local dealer. (7) should be close to ground lightning ground. Installation and operating instructions: (1) first determine whether the correct supply voltage: DC12V, being outside in the negative. (2) with a 75Ω coaxial cable to transmit video signals to the monitoring equipment. (3) the appropriate choice of location of the camera fixed. (4) connected to the power and adjust the camera angle to the target location into view. System configuration list: (1) a camera; (2) a description; (3) a certificate;