出生地 |
Guangdong China (Mainland) |
模式的数量 |
NP8D4B0 (2 |
规模 |
460 x 246 x 90mm |
体重 |
5.67kgs |
输入电压 |
12V |
产出电压 |
220V |
产出种类型 |
Other |
类型 |
DC/AC逆变器 |
Pure sine wave power inverter, Car power inverter, DC to AC power inverter Test conditions: 1) Operating temperature: 23°C±2°C 2) Operating relative humidity: 40-90% RH 3) Input: DC 12.8V Specifications (based on test conditions above): 1) Max. continuous output power: 2,000W 2) Surge capability peak output power: 4,000W 3) DC input static current (no load): ≤2AMP 4) DC input over load current: ≤200-240AMP 5) AC output wave form: pure sine wave 6) Normal input voltage range: 11-15V 7) High voltage cut off level: >15V 8) Low voltage alarm: 10.5V±0.5V 9) Low voltage cut off level: 10.0V±0.5V 10) Output AC voltage (at DC 11-15V input): AC 230V±10% RMS 11) Output frequency level: 50±3Hz 12) Overload power range: 2,000W, 5---30% 13) Hi-pot test: PRI/sec, 1,500V/AC 5MA/3s 14) Temperature protection: <65°C 15)Max.outputefficiency: 90% 16) AC output short circuit protection: system shut down (no damage) 17) Fan run: inner temperature rising up is ≥45°C 18) Fault warning: alarm beep 19) LED indicator: a) Normal: green b) Fault: red green 20) Fuse (spade type): 25A x 10pcs 21) Dimensions (L x W x H): 460 x 246 x 90mm 22) Environmental condition: a) Operating temperature: 0-40°C b) Operating relative humidity: 10-90% RH c) Storage temperature: -10-50°C d) Storage relative humidity: 10-95% RH