Pulling Eye patch cord LC MM Duplex

Description: Fiber optic cable can easily be damaged during installation because it’s so fragile. Protect it from damage by choosing a cable with a pulling eye. The pulling eye ensures that the strength member of the cable is pulled instead of the fiber core or jacket. Here’s the easy way to pull preterminated fiber cable use the Pulling Eye kit, Pulling eye kits protect pre-terminated fiber optic cables during installation conduits, ducts or risers. Saving time and costs when install the pre-connectorized multi fiber cable Features 1.Fibers are terminated with swivel pulling eyes to eliminate cable damage during installation. 2.Choose either a PVC or plenum jacket 3.6-, 12-, and 24-fiber versions are available 4.All type connectors are available 5.Makes pulling cable through conduits easier. Tech Specs Attenuation (Maximum) — 3.75 dB/km @ 850 nm; 1.5 dB/km @ 1300 nm Bandwidth (Minimum) — 160 Hz/km @ 850 nm; 500 Hz/km @ 1300 nm Fiber Type — 62.5-μm core, 125-μm cladding Jacket Material — Orange PVC Conductor Material — 62.5/125-μm diameter, all-glass, graded-index optical fiber Bend Radius — 8 cm loaded; 5.3 cm installed Tensile Strength — 225 lb. (1000 Newtons) short terms, 68 lb. (300 Newtons) long term Buffering Diameter — 900 μm Temperature Tolerance — Operating: (-40 to +80°C); Storage: (-40 to +80°C) Installation: (-40 to +50º C) Outside Diameter —Lie on the patch cords inside the “tube”