PU automobile acoustic cushion foaming line

Detailed Product Description PU automobile anacoustic cushion foaming line is special designed forautomobile anacoustic cushion foaming. It consists of 1 sethigh-pressure foaming machine and 1 set MH200/150 PU Foaming MouldingMachine.All the ordinal operation for foamingproduction (to open the mold, close the mold, lock the mold, drive themold-plate up/down, clamping the parts, to do edge-breaking of theparts) is hydraulic/pneumatic driven and by PLC control.Main Technical Parameter * Type: HPM50/20; * Suitable foaming system: flexible foam, integral skin foam, * Suitable material viscosity 22 degree Centigrade: Polyol: max. 3000 mPa.s, Isocyanate: max. 1000 mPa.s * The flow capacity ranges: 100950g/s, * Mixing ratio range adjustable 2-2.5:1, * Pouring programming time: 0.50 99.99sec * Mold installation board area: 2000×1450mm;* Mold installation space height: 830mm;* Movable mold-plate stroke: 100mm;* Mold-open angle: 30°* Hydraulic working pressure: 8 12MPa;* Control voltage: AC 110V/DC24V