PTFE resin for molding large tubes,sheets,rods and

PTFE Molding powder resin is suitable for molding to produce rods, sheets, tubes, skived films and gasket etc. It is white powder with excellent chemical stability and electrical property and low frictional coefficient.Description GradeDescriptionApplicationHX-011High purity,High tensile strengthHigh purity rods,sheets and filmsHX-012High purity,General tensile strengthSmall high purity rods,sheets, filmsHX-013General purity,General tensile strengthGeneral molding parts Specification ItemsIndexHX-011HX-012HX-013Tensile Strength(MPa)≥2725.525.5Elongation(%)≥250Bulk Density(g/l)500±80Average particle Size(μm)180±60Moisture(%)≤0.04Melting Point(°C)327±5Standard Specific Gravity2.14-2.17Thermal Instability Index≤204040Dielectric Strength(MV/m)≥60-- PACKING,STORAGE AND TRANSPORTATION 1. The product should be packed in double layers plastic bag, then placed in cardboard drum, 25kgs per drum. One drum attached a label, which should be marked the brand, batch No., weight and certificate of quality on. 2. The product should be stored in clean, cool and dry warehouse to prevent possible contamination such as dust, moisture etc. 3. Exhaust equipment is necessary when processing temperature is high. The temperature should be below 390°C. 4. The product are transported according to non-dangerous materials. High temperature, moisture and strong shock should be avoided during the transportation.