powder coating for bicycle parts

Series 1. Standard curing and lower temperature curing is available. 2. Made to various of gloss and color: high gloss (Above 86º), flat gloss (50 85º), semi gloss (10 49º)and no gloss (below 10º), gloss and color of product is made according to clients requirement. 3. Various kinds of art texture products are available, such as sandy, wrinkle, hammer tone, lanose grain, metal effect, etc. 4. Special standard of product is available according to clients’ requirement, e.g.: RoHS Standard, ASTM963 Standard, etc. Application This type of product is designed for surface coating of domestic appliance, metal furniture, instrument, indoor fitness equipment and radiator, etc. Physical Property Proportion: 1.4-1.8varies with different color and gloss) Density distribution: average particle size is 30 38um, adjusted as clients required. Performance of Coating Film Testing Items Standards and Methods Result Impact strength test GB/T1732-1993 50 Adhesion(cross-cut) GB/T9286-1998 Class 0 Bend test GB/T6742-1986 2mm Pencil hardness GB/T6739-1996 1H-2H Salt spray test GB/T1771-1991 >500 hours Humid heat test GB/T1740-1979 >1000 hours, gloss slight loss Notation: 1. All above tests are using 0.35mm cold rolling sheet. The thickness of film is 50-80um. 2. Performance of film may slightly decrease with decreasing in gloss. Package Carton packing with liner of double polyethylene bags. 20 Kg net weight each. Storage The product must be stored in ventilated, dry and clean room with temperature below 30, no close to fire and other heating source, avoid direct sunlight, outdoor stacking is prohibited. The period of validity is 12 months under above conditions; expired products can not be used unless re-testing meets the utilization standards.