Pocket DV

Pocket DV 1) It has small contour design which does UV spray finishing for the whole bod It is very fashionable and wearable and matches with all kinds of portable tools. 2) Support PC camera and chatting function. 3) Support AVI video format 4) It can carry out high definition image recording under low illumination. 5) Support 30 fps for 720*480 and 320*240 video shoot and output. 6) Support USB1.1 and USB2.0. 7) Support 16 GB T-flash card(maximum) 8) Build-in lithium battery which can make a video more than two hours the standby time is up to 250 hours. Operation Guide 1 Charge The battery is built-in lithium rechargeable battery so when you use it the first time please charge firstly The method for charging as following 1) Connect computer use USB cable to connect the computer then it can be charged 2) Use adaptor connect charger plug with USB cable, then plug into electrical connector receptacle it can be charged When you charge it green light and red light will bright simultaneously of which states are stillness Notice when battery power is not enough D001 will enter into protection mode so it cannot be turn on. Now please charge for it.2 Power on to videoPress Power button slightly, yellow indicator light begins to bright, now it enters into startup ready mode, which can enter into standby mode quickly. Press Record / Stop button slightly, yellow indicator light begins to bright red indicator light starts to flash slowly At this time it begins to make a video The resolution for video file is 720*480, and frame number is 29--30fps/S. Then short press Record Stop button video is stopped and saved automatically After saving the red indicator light remains light If you need to continue to video please press Record Stop button slightly once more.Notice a Please make sure T-flash (Micro SD) card has been inserted if not it will be power off automatically after 30 seconds b The maximum capacity of T-flash card is 16GB c Saving file needs certain time, so please don’t press Operation button continuously in order to avoid saving unsmoothly and generating incomplete file d When you make a video please focus on the object and keep 50cm under sufficient illumination. Then the video will be right, natural color clear and stable 3 Sound control video 1) Press Power button slightly yellow indicator light begins to bright now it enters into startup ready mode which can enter into standby mode quickly At that time press MODE button slightly and then you can switch into sound control video model Now yellow indicator light always brights red indicator light flash quickly (indicate sound control standby mode)When decibel of video is more than 60then it will be video automatically At the moment yellow indicator light always brights red indicator light flash slowly (Indicate under sound control video) 2) When sound control starts the shortest shoot time is 2 minutes. After 2 minutes if there is no any sound, D001 will save file automatically and switch into standby mode If there still has sound after 2 minutes D001 will continue to shoot 4 Time set There is a CD with the product which contains a file named time synchronization file.Please copy it to TF card. When connect D001 with computer whose time will be displayed with computer synchronously. The detail as following 1) Build a text called TAG.TXT under root directory of card. 2) Open TAG.TXT write synchronous date according to enclosure strictly. Details as following [Date] need space with newline 2009/07/22 needs space with newline, 12 00 00.Power on the machine every time system will check and analyses TAG.TXT then set system time according to file time. After that the text will be deleted by system automatically.5 Power offUnder video mode or standby mode please long press Power button 3 seconds then release till indicator goes out. Then the machine is turned off.6 Auto-power off functionMINI DV will save file and turn off automatically as following a When you shoot video without enough power, file will be saved automatically then auto-power off b When disk space of MINI DV is not enoughn, after indicator goes out immediately file will be saved automatically then auto-power off c Under standby mode without any operation in 45 seconds, it will be auto-power off7 Connecting computer1) It can connects computer under power off mode, standby mode or video mode after that which can be used as U disk who can copy cut and paste delete file2) When you connect it with USB port a portable disk mark will be seen after several seconds Red indicator light always brights yellow indicator light will be from flashed quickly to always brights Notice a. When you connect computer if the machine cannot be identified, or not see the portable U disk mark in 30 seconds, please insert it again b It is better copy or cut video file into computer hardware then play Video file which is saved in the machine is played directly will cause unsmooth play the reason is that gigantic data cannot be transmitted synchronously8 PC CameraWhen you first use PC camera please install driver The driver name is SPCA1528_V2220_M…Setup exe which is placed in attached CD When you install please double press this document and as per guide to do After that there will be an AMCAP icon on the computer deskUnder power off or power on mode use USB cable to connect computer, the mode is U disk moe Then short press MODE button, at this moment it can be switched into PC camera mode Then double press AMCAP icon can be used as PC camera 9 ResetWhen machine works abnormal for illegal operation or other unknown reasons it needs to be reset.The specific operation method as following Use slim pole to press the Reset button and then finish one reset operation