PHQ208 Batch Mixer(Electric Powered Unit)

1. General Introduction • PHQ208 Skid Mounted Batch Mixer(Electric Powered Unit) adopts closed loop hydraulic system, and the variable control mode can meet various working conditions. •Three mixing styles include jet mixer mixing, blending mixing and recirculation mixing are which ensures to get the outstanding slurry. •The unit is configured with main skid and auxiliary skid. These two skids are connected by hydraulic union and rubber hose. All the operation is gathered on the control console which ensures the easy and convenient operation. The batch mixing tank adopts open top design. This design is not only easy for observation and cleaning, but also has a good appearance. Furthermore it’s easy to be drained and realize zero remainder after each job. •The unit adopts explosion proof motor to provide power to meet Zone II working conditions. •The manifold of the unit is properly designed. The C-Pump suction manifold can realize the suction from each mixing tubs. Furthermore it can also realize to mix slurries with two different density in two tanks simultaneously, which can meet complex well working conditions. •This unit is equipped with cement surge tank, which makes slurry evenly spread. The surge tank is easy to be disassembled which ensures the whole skid is easy to be transported. • For more information, please kindly review our website . 2. Main Technical Data Description Main Technical Data Explosion Proof Electric Motor ABB M2JA 4B Explosion Proof Starter Box BXK55-400/380 Transfer Case FUNK Recirculation C-Pump A 6×5×14 Recirculation C-Pump B 4×3×13 Batch mixing tank 2×50bbl Max. slurry mixing capacity 2.5m3/min Slurry density range 1 2.5g/cm3 Weight Main skid 9250KG Auxiliary skid 7500KG Overall Dimension Main skid 6600×2400×3085MM Auxiliary skid 4500×2400×2585MM