PHD magnetic block core for reactor

PHDmagnetic powder core ismade by special FeSi powder. It doesn’t include any adhesive, no aging. So alloy has a higher continuous operating temperature (155°C). PHD-40powder corescan be used in medium frequency (<20KHZ) and high power (100KW-1000KW). Properties 1.Saturation magnetic flux density: 1.5T 2.Density (g/cm3): 6.5 3.Curies Temperature: 500°C 4.Continuous opening temperature:(200°C) Applications 1.UPS Harmonic Filter Inductors 2.Inverters for Solar, Wind powder 3.High-speed Rail powder systems 4.Welding power suppliers 5.High-power Industrials Benefits PHD-40 VS Amorphous laminations with gaps (>4mm) 0.1mm ordinary FeSi alloy laminations gaps (>4mm) Big size powder core >4 inch (OD) FeSi6.5% /HIGH FLUX 26μ powder core: Lower loss (Nearly zero gaps with reduction in fringe flux and core loss). Lower temperature. Lower costNo noiseNo aging.Better temperature stabilityLower 30% weight and volume and easier to wind technical than big size powder core. Part name constructed is showed as below Thank you for spending time learning about our product. For more information, please contact us for sample for testing , or go to our website.