PE,PP&Fiberglass Mesh Five Layers Construction

PLASTIC CONSTRUCTION FORMWORK EXTRUSION Plastic construction formwork is a new type of construction formwork produced by recycled PE material, coal ash, calcium carbonate and other filings. It can replace steel and bamboo construction formwork , as well as composite plate in combination with wood plate, aluminium plate. Plastic construction formwork has following features: low cost, can be reused for over 100 times, recyclable waste materials. *Features of construction formwork:Our company newly developed plastic formwork, it's main material is recycled plastic. Compared to the traditional formwork, it has features as follow:1 Good water resistance. Even put it deep in water for days it won't be deformation for damp, rotten and rusted. 2 It is incompatible and non-sticky to cement easy to scaling off mold, and won't be distortion for cement sticking.3 It has high efficient construction and good quality .The surface of building which it used for is smooth and flat so you don't have to redecorated.4 It saved procedures and improved construction efficiency. You can also do pretreatment to the formwork surface and get the decorated wall which you wanted.5 It's light and easy to construct .6 It has long life and can be used for many times. The final damaged formwork also can be crushed to be reused, it saved resource and up to the "green industry".7 It has good temperature preservation and can short construction period.8 It can be treated just like wood by many ways, also can be welded, so you can reprocessed neatly.Features of plastic construction formwork: ItemIndexDensity0.85-1.3g/cm3Tensile Strength(Crack)>22MpaImpact Strength8KJ/M2Bending Strength>22MpaCoefficient of Linear Expansion< 0.05mm/mShaw Hardness55Water Absorption< 0.02%Elastic Modulus>2000MpaVicat Softening Point>70 .