Oil-pumping polished rod BOP

The oil-pumping polished rod blow-out preventer A.Uses and characteristics: The oil-pumping polished rod BOP is a piece of safety sealing device for plugging the cavity of the pipeline in the process of oil-field exploitation. In the operation process of pumping unit, by manual control or hydraulic control, our product can not only seal the oil-pumping polished-rod, but also enclose the space between the oil-pumping polished-rod and the pipeline, in order to realize the aim of safe production and environmental protection. This producthas lotsof advantages likereasonable pressure distribution, compact structure, light weight and small size, and it can bear large pressure. B.Model description: 2GGFZHydraulic double ram BOPGGFZHydraulic single ram BOP2SGGFZManual double ram BOPSGGFZManual single ram BOP C.Main technical parameters: Project nameTechnical parametersSize(Max)62mmworking pressure(Max)21MPaDiameter of Rod sealΦ28mmDiameter of Sealed oil tubingΦ60.3mm/Φ73mmFunction(Single ram)Seal polished rodFunction(Double ram)Seal polished rod and oil tubing D.Main structure and use: 1.The oil-pumping polished rod BOP mainly consists of the case, lateral plate, seal core assembly, screw, lead screw nut, joint gland, bearing, cap, etc. 2.The upper end is usually machined as external thread (or other forms according to the requirements of customers);The lower end is machined as internal thread (or clamp connection). 3.Installation: Please avoid reverse installation, otherwise the product cannot fulfill the role of sealing. 4.Use: (1) Before use, its performance should be examined again. Only when the performance meets the standard can the product be used at oil well. (2) The lead screw shall rotate smoothly without any difficulty. A full open is required to ensure the object with the diameter of 62mm passing through, when the rubber core and wedge disc move back to the endmost. (3) Check if the rubber core is broken. If it is broken, replace it in time. (4) The robber core can not be placed on coupling of the pumping rod, but on the oil-pumping polished rod.