妮咔Densok针洞察人的发展行动-12

Nikka Densok Pin Hole Inspector Type HDI-12 Overview: - The machine is a high voltage leak detector and operates on a high voltage test method and the electrical conductivity of the fill product packaged in a non-conductive plastic ampoule. It is designed for fully automatic in-line testing - The machine is operational and is currently being used to leak check unit dose vials → - Currently checking 2 & 4ml Unit Dose Vials. - Machine inspection rate approx 1200 UDV strips per hour, with a machine capability of 2460 strips per hour (manufacturers figure). - Qualification runs are performed annually. - The equipment is calibrated by BIL at routine intervals. - The machine will require appropriate maintenance and servicing. Included in Price: - Nikka Densok HDI-12 Pin Hole Inspector. - Conveyor In/Out. - Applicable Tooling - Operational and Maintenance documentation Machine Specifications: Reference Data: - Machine Type: HDI-12 - Built: 2008 - Machine No: 3104-311 Dimensions & Weight: - Weight: approx. 500kgs - Length: approx. 2450mm - Width: approx. 1230mm - Height: approx. 1285mm Emissions: - Noise: 77 dB(A) Services Specifications: Electrical: - Electrical Power AC400V±10%, 3 Phase - Frequency: 50/60 HZ - Control Voltage: 24 V DC - Rated Power Consumption: 1.7 kVA - Grounding: Class 3 or better (with a grounding resistance of 100Ω or less) Pneumatic: - Air Source 3 kg/cm², 60NI/min Ambient Conditions: - Room temperature: 20 ±10 ºC - Room humidity: 20-80% Current Condition: - The equipment is operational. - The machine is currently being used to leak check unit dose vials. - Currently 2 & 4ml Unit Dose Vials at 1200 strips per hour Disclaimer: - This lot is being sold entirely at the buyers own risk. Descriptions and photos are solely for guidance and is not a representation as to the quality, capacity or possible use of the items for sale. Information, specifications and suitability for use must be verified by the buyer of the equipment before contracting to purchase. - No warranty is made regarding condition or suitability for any purpose. - Items purchased cannot be returned. - This information pack is only for guidance purposes. It does not form any part of any conditions of sale, nor does it make any representations, or make any offer of sale. - This advertisement and the offer for sale does not constitute an offer capable of acceptance. Availability: - User will cease use of the Nikka Densok Pin Hole Inspector on December 2010. - User reserves the right to withdraw this lot or any item within it from sale at any time.