Multifunction Electric-Hydraulic Operating table

Electric-Hydraulic Operating Table Specification: 1) The main hydraulic pressure system is imported from Japan, safe and durable. 2) Superior stainless steel housing for the base set and support system of the table is one-time-formed. All mattresses are cast and made from polyurethane 3) The surfaces of the table are made of Plexiglas, by putting the X-ray film container between upper and bottom deck of the table. Radiographic examination can be carried out without moving the patient. 4) The back section of the table is movable, on which an elevator can be fit for the operation on kidney and gall ladder. All the clamps for fixing the accessories are detachable and easy to use. 5) The surgical operation contains two controllers, fixed type and trailing type, operating conveniently.Technical Parameter: 1) Table dimension including the rails: length 2010mm, width 540mm 2) Table top dimension: length 1985mm, width 500mm 3) Table height: lowest≤780mm, highest≥1030mm 4) Sliding distance: 300mm 5) Lateral tilt: left≥19°right≥19° 6) Trendelenburg and reverse trendelenburg: reverse trend≥20°trend≥18° 7) Head section turning: up≥15°°down≥90° 8) Back section turning: up≥80°down≥10° 9) Leg section turning down: ≥90° 10) Leg section swing out: ≥90° 11) Armrest swing out: ≥90° 12) Kidney bridge lifting distance: 150mmStandard accessories 1) Anesthesia screen frame 1 set 2) Body strap 1 piece 3) Lateral support 1 pair 4) Should holder 1 pair 5) Leg holder 1 pair 6) Clamp 1 set