mould resistance tile grout

moud resistance color tilegrout,ceramic joint filler,tile adhesiveScope: Applied in wall of indoor and outdoor, floor mosaics, ceramic tiles and stone for filling. (DB301- Small 1-3mm), (DB301-2 standard 3-8mm), (DB301-3 wide 8-15mm). Features: 1.Environmen-friendly, non-toxic, no peculiar smell; 2. Excellent flexibility; 3. Good anti-pulverization; 4. Not easy to crack, remarkable anti-permeability.5. High density, anti-ruptureRequirements of base level:Abrsion resistance/square metterless than 2000 Flexural strengthmore than 2.5MpaCompressive stregthmore than 1.5MpaWater absorption 24min/gless than 10Refeence dosageUs formula 1. you shouldensurethat thelacune prepared to fill is clean, not trashy, no seeper and other loose materials; 2. Ceramic tiles with high water absorption such as bricks and cleft bricks, the gap of which should be full wet by water before filling.Attentions: 1. Can not be constructed in the case of rain.; 2. Should be watered in 8-9 hours after constructed; 3. Products are fit 5-40 environment in use; 4. Dont clean it with acid fluid whose concentration is more than 3%, use plenty of water to wash. 5. The filling materials may contaminate the surface of tiles, especial the rough and porous tiles and all types of natural stone, marbles. Should be strictly in accordance with the provisions of the instruction to operate when construct, timely clean-up, if necessary, do partial test firstly, the company does not undertake any responsibility due to improper operations caused pollution on the surface of tiles by filling materials; 6. Any influence due to construction conditions (temperature, humidity, etc.) or the ratio errors, the final color of filling materials may be discrepant with the standard color board, but does not affect the product performance. Packaging: 2kg/carton, 5kg/bag, 25kg/bag Shelf Life: Stored in a cool dry place, sealed products can be stored for 12 months