Microprocessor controlled accumulator battery test

Features: 1 Uses the microcomputer control,can be connected with PC,many machine can be networking, realization resourcessharing. 2 The ease of operation,you may carry on the operation through the equipment control panel,such as editing program,view,start,stop and so on,or carry on the operation by PC. 3 Use the intellectualized control,may avoid the battery over charge,over discharge and so on. 4 The machine has short-circuits,over current,over voltage,ect. 5 When the equipment running, if power cut, data automatic preservation;if power on ,machine automatic restar. 6 The machine can establish the multi- groups charge & discharge program, constant current,constant voltage and so on. 1).CA---Constant current charge & discharge,run time is reached setting time,stop or enter next step 2).LV---When voltage has not reached setting voltage , constant current charge & discharge; When should reach setting voltage , run time have not reached setting time, constant voltage charge & discharge , current come down , run time is reached setting time , stop or enter next step. 3).FV---Constant current charge & discharge , voltage rise or come down to setting up voltage, stop or enter next step. 4).V/T---constant current charge & discharge, voltage rise/come down to setting up voltage;or run time is reached setting time,stop or enter next step. 5).REPEAT---Repeat, cycle 6).HOLD---Equipment is stop state according to setting time, time gets to setting time entering next step continuing running. 7).CP---Constant power discharge , voltage come down to setting voltage, stop or enter next step. The Cp order is only used for discharge 8).Other direct,such as STARTQUIT,EDIT PROG,VIEW,JAMP ect. Technology parameter: 1)Input:380 415Vac/50 60Hz 2)Max output voltage:72V 3)Precision of voltage≤±0.5%F.S 4)Precision of current: ≤±0.5%F.S 5)Precision of time≤±5S/24H 6)Range of voltage 0.5% 100% 7) Range of current 2% 100%