Metal Saddle Ring Stainless steel

Stainless steel random packing: it is a improved product based on Berl Ring's structure. the mainly difference is to change Rectangle instead of arc on two sides. Furthermore. because incurvation is not same with outcurve, it can overcome overlapping and increase the angry liquid to stir, spread the quality after strengthening, thus produced the unique performance. D×H×δ mmSpecific aream2/m3Void rate %Bulk numberPieces/m³Package densityKg/m³25×20×0.5170.5596.711904715338×24×0.5140.496.850140249.650×28×0.889.5897.815000239.776×48×157.6974625244.7 Features: MSRs offer a 30% lower pressure drop than Pall Rings but with a lower liquid hold-up. This facilitates shorter packed bed heights. MSRs’ physical shape permits maximum randomness and minimum alignment, Advanced design gives it a high rate of liquid film surface renewal producing a high mass transfer rate, leading to a greater capacity and efficiency compared to other random packings, Large number of contact points for homogenous distribution of liquid and gas, Facilitates shorter packed bed heights. Application: Metal Saddle Rings offer high performance random packing, successfully used in mass transfer towers both small and large diameter. Metal Saddle Rings are also frequently used in deep vacuum towers where low pressure drop is crucial and also high pressure towers where capacity significantly exceeds conventional trays. 1) A versatile packing used in distillation, absorption etc. 2) Used in both deep vacuum and high pressure towers.