Metal-oxide Surge Arrester (YH10W-21kV E3)

Metal-oxide surge arrester(Lightning arrster, polymer surge arrster) Technical Performance The technical performance of metal-oxide surge arrester is accord with IEC60099-4 and IEEE(ANSI)C62.11. The product certification through KEMA Nederland B.V. T&D Testing Services. Structural Design The module core design was developing in the early 80s and has over 15 years service experience, with the housing material changing in the early 90s. The modular single column polymer housing metal-oxide surge arrester design is available up to 220kV systems. The essential feature of the internal patented construction is the permanent homogenous resin and fiberglass bond over the complete insulating service of the metal-oxide varistor, the arrester module has an inherently high mechanical strength and provides a uniform dielectric at the insulating surface of the metal-oxide varistor. Advantage (CANTOR BRAND) - Low residual voltage - Long protection distance - High energy input capacity - Stable U-I characteristics even after multiple strokes - Proof against ageing - Explosion and shatter-resistant design - Pollution resistant and UV-stable - Housing resistant to rough handling - Maintenance free - Stable against shock and vibration - High mechanical resistance Main Technical Para meter of Polymer Housing Metal-oxide Surge Arrester (YH10W-21kV E3) 1. Rated Voltage (Ur): 21Kv 2. Nominal discharge current (In): 10kA 3. Maximum continuous operating voltage (Uc): 17kV 4. Housing insulation withstand -Lightning impulse : 120kV -Power frequency (wet):60 kV 5. Residual voltage at -Lightning impulse 8/20us:60 kV -Steep current impulse 1/10 us:69 kV -Switching impulse 30/60 us:51 kV -Switching surge(Peak current): 500A 6. High current impulse withstand value (4/10us): 100kA 7. Total creepage distance (Minimum): 32mm/kV