煤粉碎机

Coal Crusher application:Coal Crusher PE series are based on years experience and technology development. The continuous improvement and refinement has made them the preferred jaw crusher for professionals and our customers. They can meet most crushing requirements in primary and secondary crushing, and the largest compression resistance of the material is 320MPa. This series are widely used in stone mining, metallurgical, construction, smelting, hydraulic and chemical industries, etc. Coal Crusher working principle: The motor transmits power through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving jaw plate increases when moving jaw moves. So the moving jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet. Coal Crusher characteristics: (1).High crushing ratio (2).Even product granularity (3).Simple structure (4).Wide ranges of choices (5).Reliable working condition (6).Convenient maintenance. Technical parameter Model Feeding inlet size (mm) Max feeding size(mm) Discharge size(mm) Capacity(t/h) Motor power(kw) (t) PE-150 150×250 125 15-45 1.2-3.5 5.5 0.6 PE-250 250×400 210 20-60 5-22 15 2.8 PE-400 400×600 340 40-80 18-60 37 7 PE-500 500×750 425 50-100 43-102 55 10.6 PE-600 600×900 500 65-160 51-180 75 19.2 PE-750 750×1060 630 80-180 80-195 110 29 PE-900 900×1200 780 95-180 140-270 132 51 PE-1000 1000×1200 850 195-280 190-310 132 55 PE-1200 1200×1500 1020 150-300 260-510 160 100.9 PEX-150 150×750 120 18-40 8.5-28 15 3.8