Mechanical Tyre Shaping and Curing Press B-Type fo

This Curing Press is appliable for curing PCR & LTR tyres with Nitrogen or steam as curing medium. This Curing Press is a Mechanical type, the beam moves vertically and horizontally for tyre loading and unloading. The center mechanism is BOM type and the curing mould is heated by PLATEN.Other features: Dual-Column Vertical Chuck Loader, Dual-Cylinder Unloading Device, Pro-Bar Style Mould Stripping Unit. As per customer's request, Auto-Adjusting Device, SMO Drive Device, PCI and Singel-, Double- or Triple-position Green Tyre Holder are available. Curing Piple can also be made into order. This Curing Press uses PLC for real-time control, and industrial PC for Human-Machine Operation Interface.All parameters can be re-set during Curing Cycle, and real-time data collection/preservation,alarming,as well as data back dating can also be realized through this system. With ethernet interface,Curing Press group-management is available. Brief Technical Parameters:1 Type of Cured Tire PCR & LTR Tire 2 Heating Type Platen3 Number of Mould 14 Type of Center Mechanism BOM5 I.D. of Mould Shield 1335mm6 Max. Mould closing force 1380kN7 Height of Mould 420-480mm8 Max Mould Weight 3000kgs9 Diameter of Bead 15-2010 Max. Height of Green Tire 450mm11 Max. OD of Cured Tire Two-piece Mold 950mmSegmental Mold 900mm12 Max.Section Width of Cured Tire 350mm13 Designed Mould Open/Close time 18s14 Max Load of VCL 60kgs15 Max External Pressure 1.4Mpa16 Max.Internal Pressure 2.8Mpa17 Hydraulic Water Pressure 1.8-2.1Mpa18 Compressed Air Pressure 0.7Mpa19 Control Air Pressure 0.25-0.35Mpa * Our Curing Press range is from 40.5" to 125".