MDL-60A Anchor Engineering Drilling Rig

MDL-60A Anchor Caterpillar Drilling Rig is a high efficiency drilling rig mainly for anchoring, jet grouting and dewatering, which is well designed and produced by Jiangsu Wuxi Mineral Exploration Machinery General Factory Co., Ltd. This series Drilling Rig is all-hydraulic operated drill accordance with the requirements of subway, high-rise building, airport and the other deep foundation pit. Main characters:1Apply to various construction technique: 1.1 Anchor. It can be used in anchor drilling when the main shaft connect with drill rod /drill pipe, casing, also with casing-followed drill tools. 1.2 Jet-grouting. It can be used in single-pipe, double-pipe and triple-pipe jet-grouting, etc. It can meet the following construction technique after equipped different module,: 1.3 Dewatering for foundation pit 1.4 Micro-pile 1.5 Investigation (After equipped the hoist module and orifice device module and so on, it can be used in engineering geological exploration which hole depth is less than 100m) (exclude CPT and Dynamic Penetration) 2Based on different stratum, we can adjust torque and rotary speed of drilling rig to increase drilling rigs adaptability. At the same time, we can adjust torque and rotary speed according clients request. 3With the crawler, it has fast mobility, accurate location, time-saving, good reliability and stability and other technical feature. 4It can reduce labor intensity and increase efficiency after equip the clamping and breaking device. 5We also Research and Design the match drilling tools to meet the following construction technology: 5.1 Anchor 5.2 Jet-grouting 5.3 Mud Positive Circulating Drill. 5.4 DTH hammer Impact Drill by Air. 5.5DTH Hammer Impact Drill by Water. 5.6 Multi-liquid Reverse Circulating Drill.Hole Diameter (mm):Φ90-Φ185 Hole Depth (m):60-30 Rod Diameter (mm):Φ73-Φ89 Rod Angle (°):90-5 Output Rotary Speed of Power Head (r/min):10,20,40,50,60,80,100,120 Output Torque (N.m):2500 Stroke of Power Head (mm):1800 Stroke of Slide Frame (mm):600 Lifting force of Power Head (kN):42.5 Lifting speed of Power Head (m/min):1.5,6,7.5 Feeding Force of Power Head (kN):25 Feeding Speed of Power Head (m/min):02.5timing9.512 Input Power (electromotor) (kW):18.5+11+1.5 Transportation Dimensions(L*W*H, mm):3800*1800*2000 Horizontal working station(L*W*H, mm):3800*1800*2000 Vertical working station(L*W*H, mm):3800*1800*3600 Weight (kg):4000 Remark:Technical specifications are subject to change without prior notice and incurring responsibility for machines previously sold. The shown machines may have optional equipment. Technical data do not consider power losses.