Manual capsule fillers model-400 Size 0E

MANUAL CAPSULE FILLERThe manual capsule filler has 6 parts:1.Cap sheet 2.Encapsulation sheet3.Bottom sheet4.Spreader5.Tamping tool6.Middle sheet______________________________________________________________________PROCEDURE1.Take the cap sheet. Place it on a clean, dry surface.2.Place the encapsulation sheet on top of the cap sheet using the blackpegs to fix it correctly in place3.Pour capsule tops into the encapsulation sheet and, using a circularmotion, gently shake the tops into the holes. While doing this, cover thegap in the wall of the encapsulation sheet with one hand to avoid spillingthe tops.4.When the holes are filled pour out the excess tops.5.Remove the encapsulation sheet and put the filled cap sheet to one side.6.Now take the bottom sheet. Fix the encapsulation sheet to the bottomsheet, using the black pegs to fix it correctly in place.7.Pour bottoms into the encapsulation sheet and shake as before to fillthe holes. Pour off excess bottoms8.Remove the filled encapsulation sheet and put it carefully to one side.9.Pour a scoop of powder filler onto the bottom sheet and use the spreaderto fill the bottoms.10.If the bottoms are not filled enough, use the tamping tool to compressthe fillings and repeat the previous procedure.11.Remove the tamping tool and put it and the spreader to one side.12.Take the filled cap sheet and place the middle sheet on top using theblack pegs to fit it correctly in place.13.Turn the cap sheet / middle sheet over and fix to the bottom sheet.14.Using both hands and equal pressure, press down once to fit both partsof the capsule together.