螺旋Classifier

Spiral sand-washing machine :FG , FC Series spiral sand washing machine is widely used in mining, coal, electricity, building materials and other industries, primarily for ore washing, a classification, desliming, condensed, etc. Its main advantages: it is of simple structure, reliable running, Groove’s installation could be steeper, easy configuration, grit continuous discharges, if productivity and the concentration are large, cyclical load can be largerSpiral sand-washing machine: Spiral sand washing machine for the processing, the small particles by it's size into fine particles and micro-level, and sometimes also used for separating slimes are material dehydration.Sunk screw sand washing machine at the lower end of the spiral blade full immersion in the pulp, rating the largest area, suitable for the processing of smaller items, separation size less than 0.15 Mm.High Weir spiral sand washing machine at the lower end of the spiral blade parts exposed to the surface, the classification area should be smaller and spiral mixing effect can be strong, suitable for processing thicker material, or density of larger aggregates. Separation size greater than 0.15 mm.Low Weir type spiral sand-washing machine graded area is smallest, mixing effect could be strongest, used for processing big density or share the material granularity of rough, as well as for washing. Model Spiral diameter(mm) Spiral rotation speed(r/min) Trough length (mm ≤) Motor powerkw ≤ Dimensionsmm≤ Weight(t) For driving For lifting Length Width Height ≤ FG-3 300 12-30 3000 1.1 ---- 3850 490 1140 0.7 FG-5 500 8-12.5 4500 1.1 ---- 5430 680 1480 1.6 FG-7 750 6-10 5500 3 ---- 6270 980 1820 2.7 FG-10 1000 5-8 6500 5.5 ---- 7590 1240 2380 4.0 FC-10 8400 7.5 9600 1240 2680 6.0 FG-12 1200 4-6 6500 7.5 2.2 8180 1570 3110 8.5 FC-12 8400 7.5 2.2 10370 1540 3920 11 2FG-12 6500 15 4.4 8230 2790 3110 15.8 2Fc-12 8400 15 4.4 10370 2790 3920 17.6 FG-15 1500 4-6 8300 7.5 2.2 10410 1880 4080 12.5 FC-15 10500 7.5 2.2 12670 1820 4890 16.8 2FG-15 8300 15 4.4 10410 3390 4080 22.1 2FC-15 10500 15 4.4 12670 3370 4890 30.7 FG-20 2000 3.6-5.5 8400 11-15 3 10790 2530 4490 20.5 FC-20 12900 11-15 3 15610 2530 5340 28.5 2FG-20 8400 22-30 6 11000 4600 4490 35.5 2FC-20 12900 22-30 6 15760 4600 5640 48.7 FG-24 2400 3.67 9130 15 3 11650 2910 4970 25.7 FC-24 14130 18.5 4 16580 2930 7190 41.0 2FG-24 9130 30 6 12710 5430 5690 45.8 2FC-24 14130 37 8 17710 5430 8000 67.9 2FG-30 3000 3.2 12500 40 8 16020 6640 6350 73 2FC-30 14300 17091 8680 84.8