Low Cost Differential Pressure Gage H2000

Low Cost Differential Pressure Gage H2000 Specifications: Rating Pressure: -68 103KPa Dimensions: 4-3/4dia.x 2-3/16deep. Weight: 11b. 2 oz.(510g) Housing Material:Die cast aluminum case and bezel, with acrylic cover Media compatibility:Air and compatible gasses Finished: Baked dark gray enamel. Connections: 1/8 NPT high and low pressure taps, duplicated, one pair side and one pair back. Accuracy: +/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70°F (21°C) Pressure Rating: 15PSI(1.03 bar) Ambient Temperature Range: 20 to 140 (-7 to 60) Accessories:Two 1/8" NPT barbed fittings, two 1/8" NPT plugs, and three mounting tabs and screws Applications: This gauge is widely used fan and blower pressures, filter resistance, wind speed, furnace pressure, orifice differential pressure, drum water level and liquid pressure amplifier or hydraulic system, etc. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment. Features: Wide choice of 81 models available to suit your needs precisely, Minimal range:0-60Pa,Maximal range:0-210KPa Gauge movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. Caution: For use with air or compatible gases only. Not for use with Hydrogen gas. Dangerous reaction will occur