领导Oxynitride磷光

Brief Introduction The Special low luminous decay red phosphor ZYP630HG2 is independently developed by our company (patent has been approved). Compared with other similar products in the market, it has the characteristics of high brightness, low luminous decay, safe and environmental protection. It’s applied to the packaging of high color rendering index or low color temperature white light LED products. The products are also applied to the packaging of red LED with blue chips. Primary Characteristics Appearance: Red crystal powder. Chemical Component: oxynitride chemical compound Chemical Stability: No decomposability in water, strong stability from -50°C to 300°C in the air. Safety Capability: Meet the RoHS standard, no radiation, no toxicity, no hazard to human, and no pollution to the environment. Main parameters Usage 1.The color rendering index can be improved mixed with yellow phosphor. The high color rendering index White light LEDs of Ra>85 can be packaged with yellow phosphors. 2.The color temperature of white LEDs can be adjust mixed with yellow phosphor, the low color temperature of CCT 2700K-3200K can be packaged with yellow phosphors. 3.Pink and red LEDs can be packaged with blue or UV chips. DirectionsWeigh phosphors and epoxy or silicone in correct concentration. Mix phosphors and silicone well and pump in vacuum chamber to eliminate air bubbles. Package some LEDs and measure them. Adjust concentration and repeat the above steps until the desired CIE is achieved. (Can be mixed with other phosphors) Packaging and StoragePackaging:50g/bottle. Storage conditions: Keep products sealed in bottle and store in a clean and dry environment. Emission Spectrum