latest 2 roller steel bar cold rolling line

latest 2 roller steel bar cold rolling line

原价: 5 000 USD
郑州市, 中国
郑州市, 中国
初学者
86-0371-64388822
Katrina chang
联系人姓名

基本信息

uses: This kind ofcold rollinglineis used to making different specification rebar. working principle of cold rolling line: First reduces the diameter of the hot rolled wire steel bars, and then makes ribs on bars by cold rolling mill. The milling linecan make the steel bar HRB335,HRB400 and HRB500 as your requirement. The final productions are 2 ribbed rebar or 3 ribbed rebar. specification: small type (mean the inlet diameter below 10mm) of the cold rolling mills, medium-sized (mean theinlet diameter below 12mm), large type (mean the inlet diameter below 14mm)of cold rolling mills. automatic:This set of machine is automatic, only need two or three man, one is to control the synthetically control panel, the second is to weld steel coil and bundle the final productions.It would be kind if you tell me more detail information about the diamension of the inlet material and theproductivity you need.The more information you give ,We will prepare proper machine for you.the parameter of cold rolling mill: Project Technical parameter Unit Supplementary details Raw material specification Φ6-14 mm Roller diameter Φ228 mm Special-purpose alloy Equipped with power 75 KW YVP200-4 variable-frequency Variable-speed motor Gear center distance 228 mm Herringbone gear Rolling line speed max 3 M/s speed can be adjusted Sheared length 1-12 m Flying shear 5.5 KW Product specification Φ5-12 mm Output 0.83-7.99 T/hour The final product are 2 ribs or 3 ribs deformed steel bar in circular shape or in line shape. The whole set of cold rolling lineincluding:1. Pay-off machine2. Dephosphorization (detach the scale) and sinking mill (the first time to roll) at the first time3. Rolling mill4. Straightening machine5. Heat treatment (in consideration of you need a low strength close to 500 MPA, we add this machine to strengthen the steel extensibility)6. Cutting machine (the cutting length on the basis of your set , its speed 1.5-3m/s,it can cut below 12mm or 10mm reinforced steel bar, the final production in line shape)Or wire re-winding machine (the final productions are in circular shape)7. Flick rack (most of them we have sold are 9 meters or 12 meters long, of course we can produce according to your requirement). Its automatic, the power is1.5 KW8 Synthetically control panel.The line speed can be 3m/s,and speed can be adjusted.

交货条款及包装

Packaging Detail: 3800mm*1500mm*1600mm,in the wooden case Delivery Detail: 30 days
端口: Tianjin

付款条款

Letter of credit

Telegraphic transfer

Фотографии

    密码恢复
    要恢复您的密码,请在下面您的电子邮件地址框与您已注册请输入:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    发生了错误。请检查您的电子邮件地址,然后再试一次。
    Ваш новый пароль:

    名称为空


    Выберите страну доставки

    您还没有写消息

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    已发送您的消息!

    親密

    1
    Рынок B2B
    取消
      查看更多
        地區搜索
        全球
        Категории
          产品名称