lab cupboard: Cabinet Structure: Material: All steel (1.2mm cold-rolling steel) covered with electrostatic spraying after folding, welding, polishing, acid cleaning, phosphorization, chemical resistance. Inner liner panel: Imported from America, 6mm compact panel, acid and alkali resistance, temperature-resistance, anti-moisture Guide plate: Imported from America, 6mm compact panel, reasonable and knock-down guide structure. Concentrated and effective discharge air, letting off different poisonous gas Operation Table board: acid and alkali resistance, anti-moisture. Impact resistance, 12.7mm thickness chemsurfchemical-resistant laminate with 25.4mm edge/Trespa panel/Epoxy resin /stainless/ceramics as desktop.Window: 6mm thickness steel safe glass, balancing form elevation and subsidencei, it can be stopped at any position by pulling Lighting equipment: 30W antisepsis daylight lamp, lamp house is insulated with gas. Lightness on table not lower than 400LUX Operation panel: lighting switch, ON/OFF switch, two sets of 220V/10A versatile electric socket Ventilation equipment: selecting rust-resistance, low wasting, low noise and famous fan and special wind tube. Noise can be reduced at about 55 DB. Accessories: vertical and single test cock: made by yellow brass, the surface is treated by EPOXY baking paint. Cup slot: acid and alkali resistance, PP water cup Exterior size for fume hood (lab furniture): 1200/1500/1800x850x2350mm.