哭-2P差别扫描Calorimeter

IntruductionCRY-2Pdifferential scanning calorimeter has intelligence, small size, low price three greatest characteristics of thermal analysis instrument. Specially using to measure oxidation induction time of polyethylene, curing percentage of epoxy, anti-oxide of lubricant etc . CRY-2P differential scanning calorimeter mainly express to following characteristics1.Small size of body;2.It can quickly rise, reduce the temperature; 3.High resolution A/D(24 bits) data sampling;4.Intelligence temperature controller of the microprocessor system, the accuracy of the constanttemperature can reach to 0.1 over a long period of time because using Pt100 platinum electric resistance and intelligence temperature controller;5. Adopt numerical mass flow-meter by computer control;6.High accuracy low drift amplifier;7.CRY-2PDifferential scanning calorimeter is including data processing system and software of. oxidation induction time.Main technique specification1.scale: ± 10, ± 20, ± 40, ± 100, ± 160, ± 200 mW, and can automatically change.2.Temperature range: RT 500 ;3.heating rate: 130 min;4.Crucible material and size: Aluminum 6.7 mm × 2.5 mm;5.Gas flow 200 ml min (nitrogen or oxygen gas channel can change each other);6.Gas pressure: 0.2MPa.7.data processing system Data sampling, saving, the screen showing and report as a result, temperatureCalibration and the processing of oxidation induction time8. The instrument conditionRoom temperature: 15 25 Relative humidity: 55 75%Power Source: 220 V, 50 Hz