剪式起重固定

Stationary scissor lift is generally used for lifting cargo and people to working place .Loading and unloading goods from groud to undergroud or to other floors.The capacity is various depending on the different working height .From 100kg to 30tons.The control system and working voltage can be changed to client's requirements.This model of scissor lift is designed and produced on the special requirement from customers, on four aspects: carrying capacity, lifting height, dimension of table, and power supply. They have two mainly typesfor different sites. One is to be sited on a special place to loading cargos and lifting to a certain height to handle and move cargos. The other is sited in a lift pit and accessorial tracks. The table of lift is in the same level with the ground . ModelTable sizeCapacityNet lifting heightMin heightTotal dimensionSJG1-1.51200×1200mm1T1.5m560mm1200×1200×560mmSJG0.3-2.91400×750mm0.3T2.9m710mm1400×750×710mmSJG2-41600×1600mm2T4 m670mm1600×1600×670mmSJG0.3-51800×1200mm0.3T5m760mm1800×1200×760mmSJG1-1.52000×1500mm1T1.5m520mm2000×1500×520mmSJG1-4.22000×2000mm1T4.2m850mm2000×2000×850mmSJG3-3.52000×2000mm3T3.5m800mm2000×2000×800mmSJG2-52200×1500mm2T5m1050mm2200×1500×1050mmSJG1.5-8.52400×1600mm1.5T8.5m1450mm2400×1600×1450mmSJG2-3.52400×2000mm2T3.5m780mm2400×2000×780mmSJG3-72500×1400mm3T7m1250mm2500×1400×1250mmSJG5-52800×2000mm5T5m1020mm2800×2000×1020mmSJG2-4.52800×2600mm2T4.5m810mm2800×2600×810mmSJG2-23000×1300mm2T2m600mm3000×1300×600mmSJG1-5.83000×2400mm1T5.8m770mm3000×2400×770mmSJG3-73000×2500mm3T7m1080mm3000×2500×1080mmSJG4-1.653200×1850mm4T1.65m600mm3200×1850×600mmSJG28-1.94000×3500mm28T1.9m800mm4000×3500×800mmSJG2.5-64500×2200mm2.5T6m1000mm4500×2200×1000mmSJG4-3.155000×2400mm4T3.15m700mm5000×2400×700mmSJG3-2.86000×3500mm3T2.8m750mm6000×3500×750mmSJG4-16000×2000mm4T1m420mm6000×2000×420mmSJG3.5-66000×2800mm3.5T6m850mm6000×2800×850mmSJG6.5-4.28000×3000mm6.5T4.2m850mm8000×3000×850mm