加热工人(微型热量)的可再生的烘干机

Capacity:1.35 106.2 Nm3/min Dew point temperature: -40oC Regenerative: Heated adsorption Air inlet pressure: 0.7MPa Air inlet temperature: 35oC Follow the criterion of ISO9001 GB150 QS and pressure vessel inspection standard to manufacture strictly in order to make sure the product safetyhigh-efficiencycredibility to operate in long term. Pursue utilizing perfect design to bring long term, high efficiency, and steady to operation. Utilizing excellent heating element to raise the temperature of regenerative compressed air. Regeneration air volume just need 7% of capacity. The control panel of microcomputer(optional) of E-CTRL in Jenn-dong is a real time operating system based on the advanced microprocessor. It is controlled and monitored by concise user interface. User can identify the malfunction at the first time to make sure the sensitive location. At the same time, E-CTRL also collocates remote control port and joint control port to satisfy the special request by user. Pneumatic valve and control valve adopt international excellent brand and match special design of fueling system and oil recovery system. Which can prolong service life stability ,and also accord with the concept of environment protection by Jenn-dong. Valve switch is controlled by microcomputer program controller with performance stability to make sure no expire phenomenon when switching adsorption tower and avoid impact to sorbent by air flow. It could prolong service life of sorbent. Our product also accept custom-made with special request(Capacity is large 106.2Nm3/minspecial material-70oC dew point temperaturehigh pressure more than 0.98MPa special control, and so on.)