Jet Hand Dryer

Jet Hand Dryer Specification Model:PW-70-1 Voltage:220V /50Hz Motor Type:Brushless Motor Rated Power:1650W/650W (The power changed automaticly by the outside temperature) Current:7.5A Water Splash Proof:IPX1 Drying Time:5-7 Seconds Air Speed:85-95m/s Control Method:Microcomputer Dimensions Individual:680*270*220mm 1 pc/ ctn ,ctn size:730*370*290mm Package:(1pcs):13.50kg by Solid Paper box. Color of the Products:all color are acceptable Certificate: CE & RoHS 1.Infrared Sensor Design: The unit's"Infrared Sensor Design"makes sure your hands don't come into contact with any surface when drying; 2.Antimicrobial & Nonflammable Material: The hand drying area, drain tank, and even drain hose have all been antimicrobial treated for better sanitation,the nonflammable material avoid any accidents. 3.Self Protect System 3-1:Self protection-To prevent overusing the unit,the built-in timer will stop the unit after 25 seconds. To continuous use, draw back your hands and put them in again. 3-2:Current protection-If the current is overrun the unit will stop working until the malfunction is eliminated. 3-3:Temperature protection- If any key part is not in good condition because of the high Temperature around the unit will stop working until the malfunction is eliminated. 3-4:Short circuits protection-The control system will stop working once short circuit happens. 3-5: Electromotor protection- If the electromotor or the fans can't work because of sundries the control system will stop working until the malfunction is eliminated. 4.Sanitary: The hand drying area,drain tank,and even drain hose have all been antimicrobially treated for better sanitation 4-1: Alcohol-resistant resin used for the hand drying area allowing cleaning with alcohol. 5.For Facilities where Service is Important: 5-1:Large Office Buildings 5-2:Food Factory 5-3:Factory 5-4:Holtels 5-5:Department Stores 5-6:Casino 5-7:Restaurants 5-8:Amusement Centers 5-9:Supermarkets. etc.