Insulated glass production machine

Detailed introduction of thisinsulated glass machine: Machine introduction: 1. This machine is used for producing insulating glass. The frames are made of thickening stainless steel, so this machine is very strong. 2. The washing section is made of full stainless steel, there are 3 pairs of soft brushes controlled by frequency converter, so it can wash coating or Low-e glass at different speed, too. The glass conveying system can be adjusted automatically according to the glass thickness, it is suitable for washing thick glass, like laminated glass. Two water boxes can supply water for washing and brushes separately, which is water-saving and clean. The blower is controlled by frequency converter and adopts loop air path to avoid static effect, and washing effect is high. 3. The front press panel adopts vacuum sucking system instead of rubber sucking disc. The sucking is powerful. The back press panel adopts air flotation conveying. Automatic press between the panels, the press effect is good, and fast speed. And it can also produce staggered-sheet insulating glass. 4. It is equipped with frequency converter to control the processing speed. 5. It is controlled by PLC and has HMI. Equipped with sense switches to sense the glass location to control the frequency converter speed. And it can be equipped with a Low-e sense system, it can sense Low-e coating automatically and give an audio and shining alarm. Technical parameters Voltage 380V 50Hz Power 20.5Kw Max processing size 1800×3000mm Single glass thickness 3-16mm Conveying speed 6-44m/min Max insulating glass thickness 55mm Output per 8-hour 700-900 sheets Dimension 19500×2350×2850mm Weight 5800kg